- How to configure the LAN port address?
- Slow internet speed through WiFi on my 4G Router
- Boat remote access thought 4G – Port Forwarding to remote view CCTV system
- Manual APN Settings for latest EE SIM cards
- Connecting other Marine Electronic Equipment to our 4G Products
- 4GConnect Power Consumption
- Advanced Diagnostic Tests for our 4G/5G Products
- Generating Diagnostic Information on our 4G/5G Products
- How to tell what firmware your 4GConnect or 4GXtream has?
- VPN on our 4G Products
- Slower speeds when StarLink is active?
- How to configure the LAN port address?
- Using the 4GXtream’s GPS on the NMEA 2000 network
- How to set up 4G/5G Xtream failover mode with Starlink
- Testing and Configuring the NAVAlert SMS Feature with 4G/5G Xtream
- Powering Starlink antenna when connected to 4G/5G Xtream
- Switching SIM cards automatically or manually
- Setting up an anchor alarm with 4G Xtream / 5G Xtream
- Slow internet speed through WiFi on my 4G Router
- 4G Xtream WiFi / GPS / Bluetooth antenna layout
- Why can’t I program voyage destination?
- DSC and TX Warning Messages in proAIS2
- Errors on proAIS Diagnostics Table
- What’s the LEN value of the AIS?
- AIT2500/AIT5000 – Disable NMEA 2000 Heading Reception
- Red Status LED flashing on my AIS transponder
- My AIS Transponder is not transmitting
- I cannot display AIS targets
- I don’t have a good AIS range
- I cannot connect the USB of my AIS transponder
- Crazy Mouse Syndrome – for GPS160 USB Version
- Configuring a GPS160 for 1PPS Output
- GPS Jamming in Baltic Countries
- GPS160 IP Rating
- GPS160 SOG reading standing still
- Do I need to change the GPS160 Operating Mode?
- Connecting iKonvert to the GPS160
- Connecting GPS160 to an NMEA 0183 equipment
- Setting DIP Switches for GPS160 NMEA2000 as main GPS source
- Testing UDP and TCP connections with a Testing App
- DSC and TX Warning Messages in proAIS2
- AIT5000 Voltage Problem
- Why does my iPhone/iPad show “Weak Security” or no WiFi icon?
- Can I use an external GPS antenna for my AIS Transponder, or do I have to use the supplied antenna?
- AIT2500/AIT5000 – Disable NMEA 2000 Heading Reception
- Red Status LED flashing on my AIS transponder
- AIS is not displaying boats’ names
- How to manually reset an AIT5000
- My AIS Transponder is not transmitting
- iKonvert USB Gateway – Mouse goes Crazy!
- Connecting a transponder to a chartplotter using iKonvert without an NMEA network.
- How do I test if an iKonvert is faulty? – Supply Voltage Test
- Testing NMEA 2000 Network
- Is iKonvert USB gateway compatible with LINUX or MAC OSX?
- Can iKonvert USB gateway provide RAW NMEA 2000 data or does it just convert to NMEA 0183?
- I am a software developer, how can I learn more about implementing NMEA 2000 data in my software by using iKonvert/NAVLink2?
- Does the iKonvert have an autopilot mode?
- How to update the iKonvert USB?
- Connecting WindSense to an iKonvert
- Testing UDP and TCP connections with a Testing App
- NavLink and Furuno DRS4W Radar
- WIMWV instead of MWV from wind sensor
- What do the LED indicators mean on WLN10/30/NavLink2?
- Testing NMEA 2000 Network
- Navlink2 LED Flashing red
- I am a software developer, how can I learn more about implementing NMEA 2000 data in my software by using iKonvert/NAVLink2?
- How to update the built-in web interface?
- How to update the NavLink2 firmware?
- What’s the WiFi network password?
- How to connect NjordLink to your boat’s network?
- What is the password for my NjordLINK?
- As a boatbuilder, can you develop a custom app?
- How can I become a developer?
- Do I need internet connectivity for NjordLINK to function?
- How do I reset a NjordLINK?
- Is my data secure?
- Where should I install NjordLINK?
- Windows Defender warning with SmarterTrack installation
- I cannot Install Navionics Charts in SmarterTrack software
- How to set up NMEA interfaces with SmarterTrack
- How to Configure Navionics Charts in SmarterTrack
- How to activate SmarterTrack
- How to create route and waypoints in SmarterTrack?
- How to check tides in SmarterTrack?
- How to get the weather in SmarterTrack?
- How to navigate with SmarterTrack?
- How to display AIS targets in SmarterTrack?
- WL510 Configuration File Update
- Changing the default SSID and Password on our iNavConnect/iNavHub/iKConnect routers
- Connecting our WL510 to a Password Protected type Restaurant/Bar hotspot
- Connecting our WL510 to a Captive Portal type Marina hotspot
- Configuring a WL510 after a reset (WiFi Procedure)
- Configuring a WL510 after a reset (Wired Procedure)
- WL510 Hardware Reset
- Using WL510 with 4GXtream
- Testing UDP and TCP connections with a Testing App
- What do the LED indicators mean on WLN10/30/NavLink2?
- Cannot connect a device to the WLN NMEA Server
- How to update the built-in web interface?
- How to update the WLN10/30 firmware?
- What’s the WiFi network password?
- How to interface our WLN10/WLN30 to your navigation system?
- I don’t receive NMEA data on an iPad/iPhone app
- What is the WiFi range/coverage of my product?
- I have already a Wi-Fi router on board – can I join the product Wi-Fi to an existing network?
- How to connect the WND100 to an AIS transponder?
- How to connect WND100 to a Port Com?
- How to connect the WND100 to the WLN10/WLN30?
- How to connect the WND100 to an NMEA 0183 equipment?
- How to connect the WND100 to the Nasa Yacht Repeater?
- How to connect the WND100 to an NMEA 0183 to USB Adapter?
- Connecting WND100 to iKonvert
- WND100 Drawings & Dimensions
Updating…