WL510 Configuration File Update

In the fast moving world of wireless technology, our WL510 is quite old now and you might get the message: “err_ssl_version_or_cipher_mismatch” when trying to upload the configuration file. This is due to the age of the firmware as V5.5.8 used TLS V1.0 which is no longer supported in most modern browsers. The way to get...

Changing the default SSID and Password on our iNavConnect/iNavHub/iKConnect routers

Connecting our WL510 to a Password Protected type Restaurant/Bar hotspot

Connecting our WL510 to a Captive Portal type Marina hotspot

Configuring a WL510 after a reset (WiFi Procedure)

If you have followed the procedure to reset the WL510 then you must follow the procedure below to reconfigure the WL510. You must download the product firmware by clicking here.   Configuration Procedure – Wireless Method After a reset, the WL510 reverts to a factory defaults state and needs to have a WL510 Configuration file...

Configuring a WL510 after a reset (Wired Procedure)

If you have followed the procedure to reset the WL510 then you must follow the procedure below to reconfigure the WL510. You must download the product firmware by clicking here.   Configuration Procedure – Direct Cable Method After a reset the WL510 has a fixed IP address of 192.168.1.20 and does not provide IP addresses...

WL510 Hardware Reset

First you need to unscrew the four black screws that hold the end cap of the WL510 in – the end cap with no connectors… Once the end cap is removed look down in to the unit and you will see the Reset switch which I have highlighted in the red box…. Here is another...

Using WL510 with 4GXtream

To decide whether to use the Mobile 4G connection or the WL510 long range wireless connection, you will need to go in to the 4GXtream web interface and click on the Network>WAN menu option….which will display the page below. You can use the switches at the end of each line to select whether you want...