To connect a Calypso Wireless Wind Sensor, go to the Bluetooth page.
If the Calypso sensor is detected, it will appear in the Unregistered Devices section.
If you do not see the Calypso sensor, please follow the Calypso pairing process and verify the device using the Calypso mobile application.
IMPORTANT: The sensor will not connect if the Calypso mobile application is currently connected to the device. The Calypso sensor does not support multiple Bluetooth connections, so the mobile application must be disconnected before pairing it with the NAVLink Blue.
The Calypso sensor does not require any additional configuration. Simply click “Pair” to connect the device.
Because this sensor is often mounted in locations that are difficult to access, the NAVLink Blue supports Battery Status and DC Detailed Status PGNs.
This allows the remaining battery level of the sensor to be displayed on compatible MFDs, as shown on Garmin MFDs.
Note:
If the sensor cannot be detected by the Calypso mobile application, it will also not be detected by the NAVLink Blue. Make sure the device is powered and visible in the Calypso app before attempting to pair it with the NAVLink Blue.
The Bluetooth range of the Calypso sensor depends on the transmission power of the sensor itself and the installation environment. As a result, the achievable range may vary depending on mounting location and surrounding structures. This transmission power is defined by the Calypso device, and the NAVLink Blue cannot increase or extend it.