For all sensors described in this document, only the pairing procedure with the NAVLink Blue is covered. For detailed information regarding installation, calibration, and operation of the sensors, please refer to the manufacturer’s user manual for each device.
The NAVLink Blue can be used in two modes:
- Server Mode
used to connect to Vakaros Atlas 2 or NMEA Remote application. When the device is operating in this mode, it cannot connect to external sensors.
- Client Mode
Client mode allows the NAVLink Blue to connect to external Bluetooth sensors such as Calypso, RuuviTag, Water Presence Sensor, etc.
If you want to connect external sensors, you must switch the device to Client mode:
- Open the Settings
- Click “Switch to Client Mode”.
Once the NAVLink Blue is in Client mode, it will be able to detect and connect to compatible external sensors.