“CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder with a full integrated 5” hi-res colour display. “
CLA2000 – Class A AIS Transponder
SKU: ZDIGCLA2000
CLA2000 - “The Modem is not responding” Message during installation
If you see the “Modem Not Responding” error on a CLA2000, then it indicates that the 120 Ohm resistors are not fitted to the six NMEA 0183 Inputs and electrical noise at power up, causes the main processor to think the modem has a problem.
There are three inputs on the 18 Way Connector and if you have the 14 Way connector fitted, then there are additional three inputs on this cable as well – see the connection tables below, where the six NMEA 0183 Inputs are highlighted by red rectangles.
Simply connect a 120 Ohm resistor between the RX A and RX B wires on each of the six inputs. You only need to fit the resistors to the inputs of the cables that are attached to the CLA2000 and if you have the optional Connection Box fitted, these resistors are pre-installed in the box and no additional resistors are required. A pack of six resistors (see image below) are included in every CLA2000 package.
If the error is not resolved by following the above, please contact us again.
Smartertack Demo Features
4.1mbPC Navigator Easy to use PC based navigation Software with Navionic’s compatability. Optimised for AIS target tracking and viewing
CLA2000 Full Introduction Package
2.74 MBCLA2000 Declaration of Conformity V7
164.76 KBCLA2000 Installation And User Guide V1 00 Eng Pdf
4.01 MBCLA2000 Latest Installation and User Manual (English)
“CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder with a full integrated 5” hi-res colour display. “
Introduction video of the CLA2000
What’s included in the box of the CLA2000?
| Weight | 1.5 g |
|---|
Updating…