veKonvert – Victron VE.Direct to NMEA 2000 gateway

As standard the BM100 includes a 500A shunt.  1000A and 2000A variants are available to special order.  Please contact us.

veKonvert is compatible with the following Victron products…

• BMV -700
• BMV -702
• BMV -700H
• BMV-712 Smart
• BMV-710H Smart
• BMV-712 Smart Rev2
• SmartShunt 500A/50mV
• SmartShunt 1000A/50mV
• SmartShunt 2000A/50mV
• All MPPT Charge Controllers

NOTE – veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged in to the VE.Direct interfaces of any Victron “Consumers” such as Multiplus, Quattro, Cerbo, etc.

veKonvert connects to the SmartShunt via the veDirect interface.  All calibration of the boat’s battery capacity etc is done via the Bluetooth interface integrated into the SmartShunt.  Download the Victron app and follow the set up instructions included with the SmartShunt.  There’s no calibration required on the veKonvert interface

You can monitor batteries in parallel (or series) with the BM-100 as long as the 500A continuous current rating is not exceeded.

The BM-100 will cope with sudden spikes in current well above 500A, for instance during engine starting.

You can also mix and match Victron kit with our veKonvert. We offer the BM-100 bundle, just so our customers can order a popular combination, but there is nothing to stop you buying any Victron Smart Shunt with ve.Direct interface and plugging it in to one of our veKonverts.

veKonvert will even work with Victron BMV units and MPPTs, it detects what it is connected to and changes its operation to suit.